微量元素锌在治疗Bell麻痹中的作用

为探讨急性早期应用补锌和综合疗法治疗Bell麻痹 ,将 1 5 8例Bell麻痹患者 ,随机分成两组 :(1 )补锌组 (补锌 +综合疗法 ) ;(2 )对照组 (单纯综合疗法 )。对其进行了观察对比治疗 ,同时检测了所有患者治疗前后自身对照发锌值 ,还对所有患者进行了定位诊断、面神经电反应测试、并对面肌功能进行评分。结果表明 ,对定位诊断其病变在D段、面肌功能评分在 1 1分以下、面神经无电反应患者 ,即使给予早期综合治疗 ,效果仍较差 ,而早期给予补锌加综合治疗效果优于对照组 ,其它段内患者治疗次数和治愈天数也均优于对照组。可见微量元素锌在发挥免疫应答、免疫调控中的重要作用     

Surface characterization of cellulose fibres by XPS and inverse gas chromatography

Inverse gas chromatography (IGC) was used to determine the dispersive component of the free energy as well as the acid-base properties of cellulose fibre surfaces, before and after modification by corona treatment. It was found that the corona treatment increases both the dispersive contribution to surface energy and its acidic character, whereas only a slight increase in its basicity was observed. It was also found that some chemical degradation of the surface occurs at high corona currents. The extent of modification of the surface properties, as revealed by IGC, was correlated to the surface chemical composition deduced from XPS analysis as well as with the electrical conductance and the pH of the water suspensions of the cellulose fibres.     

Determination of heavy metal concentration in feed and permeate streams of polymer enhanced ultrafiltration process

Polymer enhanced ultrafiltration (PEUF) is a newly developed method for the removal of heavy metals from aqueous solutions. This method was applied for the removal of mercury and cadmium with the presence of polyethyleneimine (PEI) as a water soluble polymer. After ultrafiltration experiments for metal–polymer mixtures, two separate streams, namely, retentate and permeate, former of which contains mainly metal–polymer complex and free polymer molecules while latter of which mainly contains free metal ions, were obtained. At the end of PEUF experiments, performance of operation was determined by concentration analyses which was achieved by atomic absorption spectroscopy (AAS) applied in a different way for permeate and retentate streams considering the effect of presence of polymer. For mercury analysis, cold vapor AAS was applied. It was observed that the presence of PEI did not affect the atomic absorption signal when 10% HCl was added to the sample solutions. For calcium and cadmium, flame AAS was used. It was observed that change in PEI concentration results in change in measured concentration of calcium and cadmium. Therefore, two new approaches were developed for accurate measurement of concentrations of calcium and cadmium. It was also observed that presence of other metals did not affect the accuracy of the measurement of a particular metal in the concentration range studied.     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.     

Electrochemical behaviour of an indium electrode in concentrated KOH solutions at different temperatures

Summary The electrochemical behaviour of pure indium in KOH solutions (1–4M) was studied at different temperatures (25–70°C) by potentiostatic techniques. Two anodic peaks corresponding to the formation of In(OH)₃ and In₂O₃ were observed. The heights of the two peaks increased with the increase of alkali concentration. An increase of temperature increased the peak currents and shifted their corresponding potentials to more negative values. The variation of the peak currents and peak potentials with scan rate suggested that the anodic dissolution of indium was a diffusion controlled process. In cyclic voltammetry, the reverse scan consistently showed one peak which was attributed to the reduction of anodic oxidation products into indium. X-ray diffraction analysis confirmed the presence of In(OH)₃ at the first anodic peak, In(OH)₃ and In₂O₃ at the second anodic peak and In₂O₃ in the permanent passive region.

---

Zum elektrochemischen Verhalten einer Indium-Elektrode in konzentrierter Kalilauge bei verschiedenen Temperaturen

Zusammenfassung Es wurde das Verhalten von reinem Indium in 1 – 4M KOH-Lösungen bei Temperaturen zwischen 25 und 70°C mittels potentiostatischer Methoden untersucht. Zwei anodische Peaks, entsprechend der Bildung von In(OH)₃ und In₂O₃, traten auf. Die Höhe der beiden Peaks wurde mit zunehmender Alkalikonzentration gesteigert. Eine Temperaturerhöhung verstärkte die Peakströme und verschob die entsprechenden Potentiale zu negativeren Werten. Die Abhängigkeit der Peakströme und Peakpotentiale von der Scangeschwindigkeit legte den Schluß nahe, daß die anodische Lösung von Indium in einem diffusionskontrollierten Prozeß stattfindet. Bei der cyclischen Voltammetrie zeigte der reverse Scan einheitlich einen Peak, der der Reduktion der anodischen Oxidationsprodukte zu Indium zugeschrieben wurde. Röntgendiffraktionsanalyse bestätigte die Präsenz von In(OH)₃ beim ersten anodischen Peak, In(OH)₃ beim zweiten Peak und In₂O₃ im permanent passiven Bereich.

     

笼形聚偕胺肟树脂的研究—酚处理对树脂吸附贵金属性能的影响

研究了笼形聚偕胺肟树脂（CAO）和酸式（ACAO）及碱式（BCAO）树脂对于苯酚、对-氨基酚、对-硝基酚、对-甲氨基酚和对-苯二酚的吸附和吸留作用，测定了酚处理树脂的中和当量。它反映了笼形树脂吸留外来物的特性。酚处理树脂有效地吸附Ag 、AuCl4－、PtCl62-、PdCl42-和IrCl62-等贵金属离子，吸附方式似乎与溶液的pH值有关。SEM观察表明，Ag 、Au－Cl4-和IrCl62-离子在吸附过程中被还原为零价态，在树脂表面生成形态各异的结晶。     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

Calcined Ni—Al layered double hydroxide as a catalyst for total oxidation of volatile organic compounds: Effect of precursor crystallinity

The effect of hydrothermal treatment on properties (crystallinity, porous structure, reducibility, acidity, basicity, and catalytic activity and selectivity in toluene and ethanol total oxidation) of Ni—Al layered double hydroxide precursors and related mixed oxides was examined. The hydrothermal treatment increased considerably both the content of crystalline phase and LDH crystallite size. On the other hand, only a slight effect of the precursor hydrothermal treatment on crystallinity of the related Ni—Al mixed oxides obtained by calcination at 450°C was observed. The reducibility of NiO particles appeared to be hindered considerably compared to the reducibility of pure NiO. Catalytic activity of the Ni—Al mixed oxides prepared from the precursors hydrothermally treated for a short time (4 h) was the highest. The highest amount of acetaldehyde formed during the total oxidation of ethanol, i.e. the worst selectivity was found for the calcined Ni—Al LDH without hydrothermal treatment. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

HZSM－5分子筛的水热脱铝研究 Ⅰ．氨－FTIR与吡啶－FTIR考察

运用ＦＴＩＲ手段，以氨和吡啶为探针研究了水热处理对分子筛结构及酸性的影响。研究结果表明，水热处理温度对分子筛中铝的状态有很大影响，随着水热处理温度的升高，骨架铝不断从分子筛的骨架中脱除出来，Ｂ酸位亦随之减少；脱出来的铝在孔道中沉积形成非骨架铝物种，其结构十分复杂，部分地形成了Ｌ酸位，从而使Ｌ酸位随着水热处理温度的升高而有所增加。Ｂ酸位与骨架铝有很好的对应关系。     

热处理对Co(Ni)-Mo/Al2O3催化剂加氢脱硫活性的影响

介绍了硫化Ｃｏ－Ｍｏ／Ａｌ２Ｏ３催化剂的热处理方法及其结果。实验表明，硫化催化剂经热处理后，加氢脱硫活性明显增加，以塞吩转化率表示的催化活性随处理温度升高而变化，在４５０℃时观察到催化活性的极大值。